Subject	Nissan techs have an adapter - you can make one
Posted by	Tom B (IN) on January 13, 2005 at 8:29 AM
	This message has been viewed 1607 times.
In Reply To	Question posted by Kenny V on January 13, 2005 at 08:23 AM
Message	Their adapter plugs into the #1 cylinder connector and permit them to plug in a special timing light. You can make an adapter by getting a short section of ignition wire, say one that connects a coil to the distributor cap, then remove the #1 coil and plug one end of the wire into it, and the other end onto the spark plug. Now your inductive timing light can work off the ignition wire instead of fussing with the wiring to the coil.
Follow Ups	The 6 Ps: Proper Preparation Prevents Piss Poor Performance> - Ash's Z 00:14:58 01/13/05 repost - EricTTZ 00:23:07 01/13/05 it's still in faq, but old one pics don't work - komplexZ(Orlando) 07:34:55 01/13/05 Yes, this was reposted because of no pics in the old one. - Ash's Z 11:39:12 01/13/05 cool cool :) (n/m) - komplexZ(Orlando) 19:30:15 01/13/05 Question - Kenny V 08:23:13 01/13/05 Nissan techs have an adapter - you can make one - Tom B (IN) 08:29:43 01/13/05 ADMIN: Can you replace this post with the one in FAQ - doug8867 08:26:06 01/13/05 If everyone FAQ's it, it will go anyway. (n/m) - Unluky (MO) 10:32:47 01/13/05 Still a nice write up - FAQ again with working pics. (n/m) - Unluky (MO) 10:33:45 01/13/05 Re: The 6 Ps: Proper Preparation Prevents Piss Poor Performance> - TheSlimOne 13:58:57 01/13/05 The famous 6 P's post. A useful post for EVERYONE! - MOTRSPRT--ID 14:11:14 01/13/05 Thanks brother (n/m) - MickieMagik(OH) 23:14:04 01/13/05
Post a Followup	You cannot reply to this message because you are not logged in.