Subject	ADMIN: Forgot to add in step 14 to put the nuts back on the
Posted by	doug8867 on September 03, 2004 at 10:51 PM
	This message has been viewed 684 times.
In Reply To	Power steering (ps) hose replacement procedure posted by doug8867 on September 03, 2004 at 06:46 PM
Message	two crossmember bracket bolts. And a slight correction to step 12 is that I used the 19mm wrench, not the breaker bar, to tighten the rack bolt, as the breaker bar nor torque wrench wouldn't fit. Perhaps ADMIN can make this correction in the post.
Follow Ups	Power steering (ps) hose replacement procedure - doug8867 18:46:40 09/03/04 Good writeup.. pics could be a little larger though - spicyZ 19:56:50 09/03/04 ADMIN: Forgot to add in step 14 to put the nuts back on the - doug8867 22:51:47 09/03/04 Nice writeup Doug (n/m) - Moxie 00:04:13 09/04/04 :-) - Spee 20:49:59 09/05/04 Yeah I saw that writeup but thought it really left out - doug8867 11:43:14 09/06/04 worked great for me... - Spee 13:34:36 09/07/04
Post a Followup	You cannot reply to this message because you are not logged in.