Subject	Do you have a boost leak tester? Eventually you'll need one
Posted by	Gordo 96NA Daytona on April 09, 2018 at 2:11 PM
	This message has been viewed 236 times.
In Reply To	How tight does lower boost hard pipe need to be clamped? posted by GrecV2 on April 09, 2018 at 12:44 PM
Message	Before you wrap up this project, test for leaks. Torque specs, etc. are sometimes irrelevant. The clamp you're speaking about needs only to be tightened enough to prevent a leak at maximum operating pressures. _________________________________________________
Follow Ups	How tight does lower boost hard pipe need to be clamped? - GrecV2 12:44:40 04/09/18 Do you have a boost leak tester? Eventually you'll need one - Gordo 96NA Daytona 14:11:14 04/09/18 Gotcha. I'll at that to the list... - GrecV2 14:36:49 04/09/18 Make a note to listen carefully around that juncture. - Gordo 96NA Daytona 15:37:23 04/09/18 Referring to the J pipe off the turbo outlet? - Zbruh92 08:55:30 04/10/18 Cool. Thx. And good tip. (n/m) - GrecV2 14:11:18 04/10/18
Post a Followup	You cannot reply to this message because you are not logged in.