| So... I just got my plenum back on after doing some valve cover gaskets and upgrading to 740s w/ the JWT early-to-late adapters... I'm re-laying out the harness to get everything where it should be, and I realize that the #1 injector (front, passenger side) is inaccessible due to the part of the plenum that extends for where the middle part of throttle body setup bolts to. There doesn't seem to be any way for the injector connector to clear under this arch and actually snap onto the injector. I can only see two ways to get past this... snap on the #1 before actually bolting the plenum down, which seems nuts, or machining out part of the plenum so it will clear. This seems to me to be something that should have been mentioned in the instructions if it was a thing... so I'm wondering WTH is up...?
Former Stage V addict... off the wagon. |
