Subject	Oem knock control sucks
Posted by	Stanky (BC) on May 19, 2017 at 1:36 AM
	This message has been viewed 454 times.
In Reply To	Code 34 posted by FrozTTy on May 18, 2017 at 09:04 AM
Message	I believe it doesn't even monitor knock after 3500rpm if memory serves me right. So when in boost you're in your own. At first I just put a resistor in the connector to eliminate the code.. this is what i recommend doing if your objective is to just get rid of the code. When I pulled the engine I replaced the sensor and sub harness. Wouldn't recommend relocating it. There's a reason why the V platforms have their knock sensor(s) in the valley.
Follow Ups	Code 34 - FrozTTy 09:04:54 05/18/17 use this for testing, if relocated I hear not as accurate - Smokiedabear 09:16:05 05/18/17 Oem knock control sucks - Stanky (BC) 01:36:08 05/19/17 I read the same thing somewhere. (n/m) - ZUL8TR 04:50:24 05/19/17 When using the resistor, it tricks the ECU and - FrozTTy 07:17:43 05/19/17 Correct - Stanky (BC) 14:20:25 05/19/17 One reason I started down the ethanol road. To raise - not4resaleZ 12:32:36 05/19/17 Good info..... my egr is removed :) - FrozTTy 08:11:54 05/20/17 Yes, but with Haltech you have full range knock control. - MixManMash 20:09:39 05/19/17
Post a Followup	You cannot reply to this message because you are not logged in.