Subject	my trans was doing this as well
Posted by	Smokiedabear on November 28, 2016 at 2:47 PM
	This message has been viewed 267 times.
In Reply To	Re: Re: It's the shifter center dust covers that are loose. posted by aquariuscsm on November 22, 2016 at 08:48 PM
Message	right after my swap. I never actually drove this trans before. Had redline mtl/mt90 in there and after a day of driving it got much better. Could be the boot although I thought I installed that right. Also fluid is nice and full in there so that was not the problem. I would check fluid, check boot, and if all is ok and sound is not horrendous ignore it and monitor.
Follow Ups	Grinding sound in 2nd and 4rth gear - 1996 Z32 N/A 18:46:34 11/17/16 Re: Grinding sound in 2nd and 4rth gear - BarryGZX 01:55:17 11/18/16 Re: Re: Grinding sound in 2nd and 4rth gear - 1996 Z32 N/A 15:33:13 11/18/16 Re: Re: Re: Grinding sound in 2nd and 4rth gear - BarryGZX 01:07:56 11/19/16 I have tried RP MT90 and found better results with >> - ZUL8TR 05:14:06 11/20/16 :) (n/m) - BarryGZX 03:54:16 11/21/16 Re: Grinding sound in 2nd and 4rth gear - aquariuscsm 22:41:05 11/21/16 Re: Re: Grinding sound in 2nd and 4rth gear - 1996 Z32 N/A 18:29:02 11/22/16 It's the shifter center dust covers that are loose. - aquariuscsm 18:56:50 11/22/16 Re: It's the shifter center dust covers that are loose. - 1996 Z32 N/A 19:13:06 11/22/16 Re: Re: It's the shifter center dust covers that are loose. - aquariuscsm 20:48:05 11/22/16 my trans was doing this as well - Smokiedabear 14:47:14 11/28/16 Re: my trans was doing this as well - 1996 Z32 N/A 18:52:53 11/29/16 Re: Re: Grinding sound in 2nd and 4rth gear - 1996 Z32 N/A 19:03:18 11/22/16
Post a Followup	You cannot reply to this message because you are not logged in.