Subject	I assume the seal puller hooks when inserted do not>>
Posted by	ZUL8TR on November 28, 2016 at 3:33 AM
	This message has been viewed 291 times.
In Reply To	Use a proper tool. posted by MixManMash on November 25, 2016 at 04:35 PM
Message	damage the seal surface. In the video as the hooks are inserted they have to be pushed against the seal area of the shaft so I assume the hooks are very smooth on the backside. To be sure of no slight scratches on the shaft what about some grease on the tool back and the shaft contact area before hook insertion ? ZUL8TR in Orlando,FL
Follow Ups	Few questions about timing belt service I couldn't find - cosmonautpetrov 22:28:46 11/24/16 Okay - white22sky 07:55:52 11/25/16 Due to age the seals can be stubborn to remove. I like to - jzack 09:50:13 11/25/16 I have done the same thing where I dimple the outer edge. (n/m) - MixManMash 16:42:50 11/25/16 Put some RTV on the area of the housing that you gouged - ZaXxon 14:46:56 11/25/16 This. (n/m) - MixManMash 16:32:49 11/25/16 Use a proper tool. - MixManMash 16:35:34 11/25/16 I assume the seal puller hooks when inserted do not>> - ZUL8TR 03:33:51 11/28/16 They are smooth. I've used the tool and it definitely won't - MixManMash 06:47:18 11/29/16 Thanks guys! - cosmonautpetrov 19:27:27 11/25/16
Post a Followup	You cannot reply to this message because you are not logged in.