Subject	Re: I'm no expert on this but found a number of posts
Posted by	SleeperPower on August 30, 2016 at 7:35 PM
	This message has been viewed 161 times.
In Reply To	I'm no expert on this but found a number of posts posted by jzack on August 30, 2016 at 06:49 PM
Message	I went through the tests and the TPS seems fine except for one thing that was weird. Using Nistune, ranged from 0.44V to 4.5V WOT. I also tested it using a multimeter and ranged from 0.44V to 4V but anything above 4V, it reads open. Not quite sure about that. I checked the resistances on the gray connector and those passed. 1.1k to 9k at WOT. I am getting 5V supplied to the TPS. My hard idle switch passed continuity tests as well.
Follow Ups	TT Automatic Trans Not Shifting to 3rd - SleeperPower 11:25:05 08/30/16 I'm no expert on this but found a number of posts - jzack 18:49:13 08/30/16 Re: I'm no expert on this but found a number of posts - SleeperPower 19:35:25 08/30/16 Another thing...has the speedo been working ok? Not sure - jzack 20:07:54 08/30/16 Re: Another thing...has the speedo been working ok? Not sure - SleeperPower 20:14:41 08/30/16
Post a Followup	You cannot reply to this message because you are not logged in.