Subject	Double check boost controller solenoid(s)
Posted by	ThisIsSparTTa on August 24, 2016 at 9:55 AM
	This message has been viewed 269 times.
In Reply To	No boost on new build posted by dTb on August 23, 2016 at 07:14 PM
Message	I had some similar wonky issues with mine when I had somehow swapped up the 2 ports on my boost controller's solenoid. Besides not getting boost, is your engine doing anything else weird when under load? Missing or stuttering? Those would be reasons I would check things like timing belt and spark plugs, which I had issues with. I'd then start checking things like PTU, coilpacks, etc.
Follow Ups	No boost on new build - dTb 19:14:33 08/23/16 Check your timing belt - Stanky 19:37:11 08/23/16 Hmm that is a good point. Ive done about 4 timing - dTb 19:44:54 08/23/16 Ok i triple counted the first 3 sets of teeth and get - dTb 21:10:22 08/23/16 I bet your timing belt is right. Otherwise, it would idle - MixManMash 13:05:51 08/24/16 Yah it idles and drives great, just no boost. - dTb 10:51:40 08/25/16 Recircs are also exposed to boost at their diaphragm - LitlElvis 14:21:05 08/25/16 Right, I completely understand the function of them - dTb 18:57:29 08/25/16 Stock recircs are closed at a dP of roughly 2.5 PSI or lower - LitlElvis 19:57:23 08/25/16 Thanks for the info on the dP, i have tested the recircs - dTb 20:31:59 08/25/16 Double check boost controller solenoid(s) - ThisIsSparTTa 09:55:11 08/24/16 I checked the solenoid, and wired per haltechs - dTb 18:45:41 08/25/16 Where did you source your turbochargers from? (n/m) - MixManMash 13:06:24 08/24/16 Z1 kit (n/m) - dTb 10:33:26 08/25/16 Did you mess with wastegate adjustment at all? - -Grimm- 14:35:02 08/24/16 I balanced them and just pulled the pipes off to double - dTb 10:35:47 08/25/16 Do the turbos spin freely? - LitlElvis 10:46:08 08/25/16 The turbos spin freely. I can hear them trying to - dTb 18:52:04 08/25/16 Few things you can try... - kickerzx 05:29:43 08/26/16 Also what anyone with problems and have the possibility.. - kickerzx 05:53:25 08/26/16 Ok, i will record a run and post it, good idea thanks. (n/m) - dTb 19:20:04 08/26/16 Ive got a file ready for review if anyone can help - dTb 20:26:55 08/28/16 Yeah, just send it. Mailadr. in profile.. (n/m) - kickerzx 10:29:15 08/29/16 Send the calibration file also if you dont mind (n/m) - kickerzx 10:30:49 08/29/16 Sent. (n/m) - dTb 19:24:26 08/31/16 ^Plug the recirc valve and see what happens - -Grimm- 13:39:56 08/26/16 Putting a vacuum on the wastegates is a good idea - dTb 19:17:35 08/26/16 Is i somewhat tuned or are yoou on the basemap still? - kickerzx 01:58:08 08/27/16 Re: Is IT somewhat tuned or are YOU on the basemap still? (n/m) - kickerzx 02:08:36 08/27/16 Timing is calibrated yes, its perfect at 15 deg - dTb 16:33:24 08/27/16 I am confused by your last statement here about - dTb 20:04:55 08/31/16 Correct! My bad.. (n/m) - kickerzx 08:35:53 09/01/16 I am confused by your last statement here about - dTb 20:15:18 08/31/16
Post a Followup	You cannot reply to this message because you are not logged in.