Subject	Re: Re: The pedal should not engage right off the floor
Posted by	TheKryptKeeper on January 15, 2016 at 3:21 PM
	This message has been viewed 381 times.
In Reply To	Re: The pedal should not engage right off the floor posted by TheKryptKeeper on January 15, 2016 at 11:16 AM
Message	So I have set the clutch adjustment exactly as described in the tech article here. Still not right. When I start the car, it suddenly feels like I have 3 inches of travel before I get any good resistance out of the clutch. I'm about to give up and just take it to a shop with a vacuum bleed system. I've ran about a pint of fluid through this already, and don't seem to have any air bubbles. Maybe i'll try to pull the clutch MC off again and "bench bleed" it.
Follow Ups	New clutch system, but still having difficulties. - TheKryptKeeper 23:31:37 01/14/16 What do you mean by you adjusted the switches until they - Tanley (ATL) 05:14:13 01/15/16 ^This^ Specially with the 350z fork. You should - puchy 11:28:18 01/17/16 The pedal should not engage right off the floor - DAYTONAZ 07:35:21 01/15/16 Re: The pedal should not engage right off the floor - TheKryptKeeper 11:16:43 01/15/16 Re: Re: The pedal should not engage right off the floor - TheKryptKeeper 15:21:25 01/15/16 I've never had luck with speed bleeders. Might have been a - Tanley (ATL) 07:18:06 01/16/16 FWIW-Had a speed bleeder installed on the slave for 6-7 - jzack 15:49:02 01/16/16 Speedbleeders are great ! Try this - jlag 07:16:24 01/20/16
Post a Followup	You cannot reply to this message because you are not logged in.