Subject	Do you have conzult or similar program?
Posted by	ttsmokin on October 25, 2015 at 9:55 PM
	This message has been viewed 225 times.
In Reply To	CAS is not in the center to set my timing at 15 posted by JFRacing on October 25, 2015 at 06:00 PM
Message	I would recommend that you confirm the idle switch is "ON" and the ECU requested timing is 15* at idle. Then re-check timing with a timing light off the #1 coil pack trigger wire, or even better use a spark plug jumper lead between the spark plug and coil pack and use the timing light around this.
Follow Ups	CAS is not in the center to set my timing at 15 - JFRacing 18:00:37 10/25/15 Re: CAS is not in the center to set my timing at 15 - MaxxAction 19:02:05 10/25/15 Re: Re: CAS is not in the center to set my timing at 15 - JFRacing 19:13:43 10/25/15 Re: Re: Re: CAS is not in the center to set my timing at 15 - MaxxAction 19:39:31 10/25/15 Re: Re: Re: Re: CAS is not in the center to set my timing at 15 - JFRacing 20:38:21 10/25/15 Do you have +0.010" head gaskets? (n/m) - -Grimm- 10:26:49 10/26/15 Re: Do you have +0.010" head gaskets? - JFRacing 11:03:23 10/26/15 Your timing will be off by... - -Grimm- 15:07:17 10/26/15 Out of curiosity, how do you get those #? - ttsmokin 10:14:59 10/27/15 Do you have conzult or similar program? - ttsmokin 21:55:30 10/25/15 Re: Do you have conzult or similar program? - JFRacing 11:03:57 10/26/15 Inspect CAS splines and flat for wear (n/m) - ttsmokin 13:21:12 10/26/15 Re: CAS is not in the center to set my timing at 15 - Coolspot 09:17:24 10/27/15 Flip the connector over and you'll get the right reading. (n/m) - Woody75 (Denver) 09:25:11 10/27/15 Re: Re: CAS is not in the center to set my timing at 15 - JFRacing 11:35:03 10/27/15
Post a Followup	You cannot reply to this message because you are not logged in.