Subject	I agree with jerdobi about C11
Posted by	ttsmokin on September 09, 2015 at 10:24 PM
	This message has been viewed 220 times.
In Reply To	Your are right posted by kurt81 on September 09, 2015 at 04:27 AM
Message	It also looks like there might be some solder joint separation on the 8-pin connector. Would be worthwhile to re-flow those and any others that look suspect. Here are some part numbers for the MOSFETs, diode, and voltage regulator: Qty 2) NEC K591 => NTE 2985 Qty 1) NEC 14305 => NTE 960 Qty 1) FMU 24S => NTE 6241 I have ordered these replacements, but haven't gotten around to doing it myself. From comparing the old and new datasheets, the new components are an upgrade in terms of power handling.
Follow Ups	Low fuel pressure - kurt81 11:02:14 09/08/15 As far as you know, car has all stock parts? That is, no - jzack 13:26:52 09/08/15 Re: As far as you know, car has all stock parts? That is, no - kurt81 13:50:19 09/08/15 Thought about an aftermarket FPR? - -Grimm- 13:54:52 09/08/15 Re: Thought about an aftermarket FPR? - kurt81 01:32:02 09/09/15 I would suspect FPCU if you say it behaves OK when bypassed - ttsmokin 15:26:27 09/08/15 Re: I would suspect FPCU if you say it behaves OK when bypassed - kurt81 01:31:10 09/09/15 C11 appears to be leaking - jerdobi 01:45:43 09/09/15 Your are right - kurt81 04:27:00 09/09/15 I agree with jerdobi about C11 - ttsmokin 22:24:03 09/09/15 Start with the capacitors - jerdobi 10:08:01 09/11/15 Re: Start with the capacitors - kurt81 07:43:47 09/12/15 EBay has the replacement transistors - jerdobi 20:58:20 09/16/15
Post a Followup	You cannot reply to this message because you are not logged in.