Subject	Re: Z1 passenger downpipe issue
Posted by	Emrldtt on May 19, 2015 at 5:04 PM
	This message has been viewed 242 times.
In Reply To	Z1 passenger downpipe issue posted by Emrldtt on May 18, 2015 at 12:27 PM
Message	I reviewed the notes I took at the area of the test pipe flange and the tube center to tube center misalignment is 1.75in. The X pipe went in without a hitch and sits nice and horizontal. (it is level with respect to the cross brace just below it). I tried to wiggle and adjust for a better alignment when mounting to the Z1 passenger downpipe and They align while looking at them from directly below... The mounts are in good shape with equal geometry height wise, the transmission mount is new. The downpipe was installed with no issues. The front most bend on the test pipe will need an additional 2.6 degrees of bend to align to the x pipe flange. Mandrel bender here we come...let's see how much going with cheap DPs will cost me.
Follow Ups	Z1 passenger downpipe issue - Emrldtt 12:27:15 05/18/15 Re: Z1 passenger downpipe issue - Emrldtt 12:29:11 05/18/15 TP's, H,or X pipe, and mufflers all loose first ? - ttz'in (norcal) 13:13:26 05/18/15 ^^^^what he said. I had the same issue when intalling my - YlwPrlZTT 21:50:45 05/18/15 Agreed: cheap is as cheap does. HOWEVER, what is the - Zuberman 22:50:42 05/18/15 Re: Z1 passenger downpipe issue - Emrldtt 17:04:09 05/19/15
Post a Followup	You cannot reply to this message because you are not logged in.