Subject	Pull the Crossover Tube, and find your Grounds
Posted by	Cjw3 on April 26, 2015 at 9:16 AM
	This message has been viewed 344 times.
In Reply To	Crank, no start after injector upgrade. Help! Desperate! posted by Placuch on April 26, 2015 at 12:28 AM
Message	Sounds like that could be your problem.. When you Try the Starting Fluid.. Squirt it in the Brake Booster line from the booster, to the Manifold.. that is the Shortest Route for the Fluid to take.. Also check that you have not crossed your Fuel Hoses going to the engine.. The Filter hose goes to the Passenger side Cj
Follow Ups	Crank, no start after injector upgrade. Help! Desperate! - Placuch 00:28:35 04/26/15 You can add a ground net system and it will take care >> - ZUL8TR 04:01:59 04/26/15 Re: You can add a ground net system and it will take care >> - Placuch 10:07:58 04/26/15 Extra grounds are like chicken soup they could improve >> - ZUL8TR 13:20:38 04/26/15 A properly wired car won't need a grounding system. (n/m) - Nate (NoVA) 23:40:30 04/27/15 Pull the Crossover Tube, and find your Grounds - Cjw3 09:16:16 04/26/15 Re: Pull the Crossover Tube, and find your Grounds - Placuch 10:01:09 04/26/15 EFI harness has group of three ground wires - ttz'in (norcal) 11:37:27 04/26/15 Good Call on the Chip.. - Cjw3 12:09:24 04/26/15 Re: Good Call on the Chip.. - Placuch 13:15:30 04/26/15 Notch on the Chip to the Center of the Board - Cjw3 17:29:45 04/26/15 Re: Notch on the Chip to the Center of the Board - Placuch 21:03:43 04/26/15 Generally the Chip is toast.. Board is fine.. - Cjw3 21:23:17 04/26/15 Re: EFI harness has group of three ground wires - Placuch 13:07:01 04/26/15 Re: EFI harness has group of three ground wires - Placuch 20:47:43 04/26/15 Sounds like EFI harness grounds are all good. - ttz'in (norcal) 20:20:42 04/27/15 Re: Sounds like EFI harness grounds are all good. - Placuch 23:56:38 04/27/15 Re: Sounds like EFI harness grounds are all good. - Placuch 07:47:54 04/28/15 I fixed it! - Placuch 07:30:01 04/29/15
Post a Followup	You cannot reply to this message because you are not logged in.