Subject	Like Grimm said, I would go with 10psi. I set mine at 14psi
Posted by	puchy on April 02, 2015 at 12:24 PM
	This message has been viewed 152 times.
In Reply To	Thats a good question posted by -Grimm- on April 02, 2015 at 10:53 AM
Message	But before I did I set them at 12psi originally then Dyno test the car(no tuning) to see what boost level I could run without engine knock (18psi). Then I went back and adjust them to 14psi since it still had a very good safety margin.
Follow Ups	To achieve desired boost - rav_300zx 06:50:47 04/01/15 i don't have an Apexi, but on the Blitz we adjust the - puchy 07:19:49 04/01/15 Re: i don't have an Apexi, but on the Blitz we adjust the - rav_300zx 08:41:25 04/01/15 Were your wastegate actuators' preload correctly set - bartz32tt 08:50:45 04/01/15 Re: Were your wastegate actuators' preload correctly set - rav_300zx 16:32:13 04/01/15 what setting are you adjusting? on the Blitz some people - puchy 21:59:08 04/01/15 Wat should he set his wastegates cracking pressure at? (n/m) - LivinTheDream 09:31:43 04/02/15 Thats a good question - -Grimm- 10:53:50 04/02/15 Like Grimm said, I would go with 10psi. I set mine at 14psi - puchy 12:24:27 04/02/15
Post a Followup	You cannot reply to this message because you are not logged in.