Subject	If it is dented then replace it or take it off and use a
Posted by	Tanley on March 28, 2015 at 12:13 PM
	This message has been viewed 210 times.
In Reply To	low oil pressure dented oil pan posted by jhop1988 on March 28, 2015 at 12:02 PM
Message	hammer to remove the dent. There is a removal guide for taking the pan off while the engine is in the car, search for it. I think you are referring to someone who welded something to the pan while the engine was in the car and used a slide hammer to attach to the welded part and pull out the dents.
Follow Ups	low oil pressure dented oil pan - jhop1988 12:02:06 03/28/15 If it is dented then replace it or take it off and use a - Tanley 12:13:58 03/28/15 Re: If it is dented then replace it or take it off and use a - jhop1988 12:21:51 03/28/15 I’ve pulled a pan in place and pulled a dent w/ welder >> - my91z 14:40:44 03/28/15 Re: I’ve pulled a pan in place and pulled a dent w/ welder >> - jhop1988 15:21:59 03/29/15 Glad it worked out for you. (n/m) - my91z 17:27:55 03/29/15
Post a Followup	You cannot reply to this message because you are not logged in.