Subject	K.. Just looked at the BIG Color GIF
Posted by	Cjw3 on March 10, 2015 at 1:32 PM
	This message has been viewed 174 times.
In Reply To	shorting injector to ground. out of ideas posted by volcomstone550 on March 10, 2015 at 12:51 PM
Message	If your Injector leads were hot, while the key is off, and the battery is in, then the 'Big GIFF File' of the wiring diag is proper for your car ( No Injector Isolation of 12 volt ).. The 12 volt that feeds EVERYTHING ( including your injectors ) comes from the Bottom ( If I have the Orientation correct ) Fusible Link at the Battery Box.. It's a White/Blk wire circuit... That feed all sorts of relays and stuff.. To check the Link ( without pulling anything big ), pull an injector Lead, and see if you get 12 volts to ground on ONE of the Injector wires.. If you do then the Fusible Link is still good.. Just for Kicks and Giggles.. check all the injectors for 12 volt on one wire.. If all of the injectors have voltage, then the wiring and the Fuse is good.. NO idea what the 'Short' could have popped.. Likely NOTHING.. I'm thinking you don't have good connections on the wires you did splice, or something is left disconnected.. Go back with all the Org Components.. and check for the 12 volts.. Then work from there.. Cj
Follow Ups	shorting injector to ground. out of ideas - volcomstone550 12:51:30 03/10/15 K.. Just looked at the BIG Color GIF - Cjw3 13:32:38 03/10/15 12volts at each injector (n/m) - volcomstone550 17:26:27 03/10/15 and theyre ticking... hmmm. check plugs for gas smell - LivinTheDream 17:39:05 03/11/15 all were wet with fuel and all have spark by turning cas (n/m) - volcomstone550 18:24:05 03/11/15
Post a Followup	You cannot reply to this message because you are not logged in.