Subject	I really like the Guy.. He is Very Anil about his work
Posted by	Cjw3 on February 12, 2015 at 10:36 AM
	This message has been viewed 204 times.
In Reply To	I think for the single valve issue posted by -Grimm- on February 12, 2015 at 09:48 AM
Message	Last head I took to him was 4 Cylinder Toyota.. Solid Lifters without replaceable shims.. you have to change the lifter to a different thickness.. He just said leave the Cam and he ground the stems to match the Lifters I had.. After the Valve job, the same Solid Lifters went back in the Same Place.. That's good work.. I have 45K Miles on that head now ( 1 Year Driving for me ) He was part of a group that was involved with 'Z Unlimited' in San Luis Obispo.. So Z32 are not new to him Cj
Follow Ups	Opinions on Valves Sticking - -Grimm- 12:39:12 02/11/15 Re: Opinions on Valves Sticking - wild_maxx 17:39:13 02/11/15 Original valves - -Grimm- 09:46:13 02/12/15 I bet the valve stem height is too tall - aliaZ 13:27:58 02/13/15 These pictures were taken without the lifter installed - -Grimm- 15:14:33 02/13/15 Remove the Lifters ( Again ) and pressurize the Bore - Cjw3 20:21:59 02/11/15 Here is my Head Guy - Cjw3 21:57:44 02/11/15 I think for the single valve issue - -Grimm- 09:48:39 02/12/15 I really like the Guy.. He is Very Anil about his work - Cjw3 10:36:30 02/12/15
Post a Followup	You cannot reply to this message because you are not logged in.