Subject	the back story is I'm working on a 94 acura legend coupe
Posted by	inf on February 05, 2015 at 8:07 PM
	This message has been viewed 177 times.
In Reply To	Yes (n/m) posted by -Grimm- on February 05, 2015 at 05:21 PM
Message	It doesn't have signal to injector #6 so I figured the ecu was bad. Turns out after replacing it it still does the same thing. I then checked the wiring and there's battery voltage to one wire at the injector connector and continuity to the other wire from the ecu. I''m now stumped as to why there is no signal. I basically went through the whole diagnostic flowchart fsm. Am I missing something or is the spare ecu bad?
Follow Ups	Am I correct to assume that with a ground pulsed injector - inf 16:56:42 02/05/15 Yes (n/m) - -Grimm- 17:21:35 02/05/15 I don't get it though..when I test it only one has battery - inf 18:59:32 02/05/15 Is it connected to the injector? - BlackholeZ 15:44:36 02/06/15 the back story is I'm working on a 94 acura legend coupe - inf 20:07:52 02/05/15 Re: the back story is I'm working on a 94 acura legend coupe - cassi8u99 07:00:32 02/06/15 thing is there's continuity through the wire - inf 10:44:03 02/06/15 What you're describing sounds like... - DVDBURN (MD) 09:31:41 02/06/15 Ya, so I'm confused on two things. - inf 10:33:51 02/06/15 Bad ECU..... - zx299 23:28:52 02/06/15 i used the noid light on another cylinder and it blinked - inf 01:07:27 02/07/15 May be the weakest link - -Grimm- 13:34:41 02/07/15 customer brought it to mineke and they also said ecu - inf 23:04:05 02/07/15 Does your parts yard offer some sort of warranty - -Grimm- 09:52:28 02/09/15 the ecu was shipped, but they do offer warranty - inf 22:53:39 02/09/15 i almost want to say this junk yard ecu has the exact same - inf 10:35:11 02/06/15 Are you talking about these voltages - -Grimm- 16:12:19 02/06/15 noid light doesn't light and there's 12 volts on one wire - inf 20:30:15 02/06/15
Post a Followup	You cannot reply to this message because you are not logged in.