Subject	If you are paranoid, systematically go through everything
Posted by	ZaXxon on January 20, 2015 at 3:17 AM
	This message has been viewed 180 times.
In Reply To	any to-do list after installing a brand new engine? posted by tian2bing on January 18, 2015 at 02:53 PM
Message	top to bottom. Once convinced you are ready. Turn ignition on, do not crank. Cycle the key 3 or for times, with a long pause before turning it back on during each cycle. This will build fuel pressure. Check for fuel leaks!!!!!!!! Only then should you start the engine. Once running, check oil pressure immediately. Then run around like a madman checking all over for any immediate leaks.
Follow Ups	any to-do list after installing a brand new engine? - tian2bing 14:53:32 01/18/15 new engine=new heads+new bottom end, - tian2bing 14:54:46 01/18/15 Check your oil pressure and water temp - SammybTT(TN) 18:07:38 01/18/15 If you are paranoid, systematically go through everything - ZaXxon 03:17:15 01/20/15
Post a Followup	You cannot reply to this message because you are not logged in.