Subject	Well sprayed lots of carb cleaner in the area
Posted by	Z32CheekiBreeki on December 30, 2014 at 2:52 PM
	This message has been viewed 244 times.
In Reply To	Put a vacuum gage on the engine and run it and read the >> posted by ZUL8TR on December 30, 2014 at 04:14 AM
Message	No response in idle, so I'm guessing it was just the sound of air going through the hoses, honestly can't really hear it too much, I think I was just over reacting a bit! The car runs great so I'm not worried, though I might use the vacuum gauge later on, CEL went away when I reset the ECU (cleared codes)
Follow Ups	Need help with vacuum routing on an NA - Z32CheekiBreeki 12:47:53 12/28/14 Figured it out! - Z32CheekiBreeki 14:01:14 12/28/14 FWIW: With the battery out that EGR vacuum nose isn't too - jzack 10:00:51 12/29/14 1/4" = 6.35mm so it will not be as tight a fit as 6mm.>> - ZUL8TR 16:54:37 12/28/14 Got all the hoses done - Z32CheekiBreeki 19:52:02 12/28/14 Spray some brake cleaner in that area, and listen - ttz'in (norcal) 22:48:03 12/28/14 Put a vacuum gage on the engine and run it and read the >> - ZUL8TR 04:14:38 12/30/14 Well sprayed lots of carb cleaner in the area - Z32CheekiBreeki 14:52:10 12/30/14 Vac gage might reveal issues you don't even notice>> - ZUL8TR 04:43:26 12/31/14
Post a Followup	You cannot reply to this message because you are not logged in.