Subject	1/4" = 6.35mm so it will not be as tight a fit as 6mm.>>
Posted by	ZUL8TR on December 28, 2014 at 4:54 PM
	This message has been viewed 282 times.
In Reply To	Need help with vacuum routing on an NA posted by Z32CheekiBreeki on December 28, 2014 at 12:47 PM
Message	but clamps might just make it work ok. Hose does not have to be OEM just rated for vacuum use. Take the brake booster hose to the Auto parts and match the size. ZUL8TR in Orlando,FL
Follow Ups	Need help with vacuum routing on an NA - Z32CheekiBreeki 12:47:53 12/28/14 Figured it out! - Z32CheekiBreeki 14:01:14 12/28/14 FWIW: With the battery out that EGR vacuum nose isn't too - jzack 10:00:51 12/29/14 1/4" = 6.35mm so it will not be as tight a fit as 6mm.>> - ZUL8TR 16:54:37 12/28/14 Got all the hoses done - Z32CheekiBreeki 19:52:02 12/28/14 Spray some brake cleaner in that area, and listen - ttz'in (norcal) 22:48:03 12/28/14 Put a vacuum gage on the engine and run it and read the >> - ZUL8TR 04:14:38 12/30/14 Well sprayed lots of carb cleaner in the area - Z32CheekiBreeki 14:52:10 12/30/14 Vac gage might reveal issues you don't even notice>> - ZUL8TR 04:43:26 12/31/14
Post a Followup	You cannot reply to this message because you are not logged in.