Subject	Just a thought
Posted by	Frldy_Z on December 01, 2014 at 9:02 AM
	This message has been viewed 273 times.
In Reply To	Ex Cam crack posted by 95TTurboZX on November 30, 2014 at 05:53 PM
Message	Real bad idea to just take off the EX cam and try to stick a new one on. Once you loosed the tensioner the belt can slip teeth on the crank. If you don't have access to the crank then you won't truly know where the timing belt lines up. If you don't have this exact then your SOL. Do it right the first time and have piece of mind!
Follow Ups	Ex Cam crack - 95TTurboZX 17:53:58 11/30/14 Yes it must be replaced. - Cjw3 20:16:49 11/30/14 It was me... - 95TTurboZX 13:16:10 12/01/14 Damn.. thanks for the update - Cjw3 17:44:41 12/01/14 3 different types of people - Frldy_Z 13:09:57 12/02/14 2nd, ASAP - ttz'in (NorCal) 07:04:13 12/01/14 How to do it right the first time. - Frldy_Z 08:48:26 12/01/14 Re: 2nd, ASAP - 95TTurboZX 13:12:58 12/01/14 That's bc of spring pressure - Frldy_Z 13:06:28 12/02/14 It's wide open - 95TTurboZX 14:36:57 12/02/14 Clamp all you want but - Frldy_Z 01:18:28 12/03/14 Calm down. Why clamp the crank sprocket anyway ? - ttz'in (NorCal) 12:15:33 12/03/14 Uh belt can slip when your not looking... - Frldy_Z 14:56:41 12/05/14 Did i read somewhere - -Grimm- 12:31:45 12/03/14 correct - 95TTurboZX 14:25:38 12/03/14 Should be fine. Wedge the belt, clamp belt to other - ttz'in (NorCal) 16:25:08 12/03/14 ^I did this - -Grimm- 17:25:44 12/03/14 Not confused... - Frldy_Z 14:58:51 12/05/14 Just a thought - Frldy_Z 09:02:50 12/01/14
Post a Followup	You cannot reply to this message because you are not logged in.