Re: I disagree, solder is far better and easy to learn

TwinTurbo.NET: Nissan 300ZX forum - Re: I disagree, solder is far better and easy to learn

Subject Re: I disagree, solder is far better and easy to learn

Posted by Matt300ZXT on November 22, 2014 at 3:01 PM

This message has been viewed 345 times.

In Reply To I disagree, solder is far better and easy to learn posted by -Grimm- on November 22, 2014 at 01:43 PM

Message Aha! I got it! There were a couple other hoses I wasn't seeing, and one fuel hose that's I guess the damper on the driver side, I had just unhooked the line going into it the other day, got sidetracked and forgot to undo the hose going from it to the fuel rail. Got that taken care of, cut a couple hoses and voila, came right out.
Now to get to work ordering new injector seals juuuust in case (even though they only have about 15k on them) and some balance tube o-rings, fuel hose kit and upper plenum gasket.
Wish I had the money to upgrade to badass 300D fuel rails or something but I won't need them, so I'll just stick with plain ol' boring ones.

Follow Ups
Think I'm missing something on my plenum pull - Matt300ZXT 16:10:16 11/21/14
Coolant hose if you haven't done delete. (n/m) - ttz'in (NorCal) 17:55:37 11/21/14
Re: Coolant hose if you haven't done delete. - Matt300ZXT 19:41:03 11/21/14
Dremel the plenum at the appropriate locations to allow>> - ZUL8TR 11:15:23 11/22/14
Crimps are often the preferred splice method - BlackholeZ 13:01:59 11/22/14
I disagree, solder is far better and easy to learn - -Grimm- 13:43:48 11/22/14
Re: I disagree, solder is far better and easy to learn - Matt300ZXT 15:01:11 11/22/14
so are you going for the new style injectors and using >> - ZUL8TR 16:47:22 11/22/14
Re: so are you going for the new style injectors and using >> - Matt300ZXT 17:09:04 11/22/14
so far 2 to 1 on crimps, they do work well need correct >>. - ZUL8TR 16:46:01 11/22/14
Yeah, theyre even worse when bad tooling is used - -Grimm- 18:00:06 11/22/14
^2nd^ (n/m) - ttz'in (NorCal) 03:52:36 11/23/14
Now 2 to 2! I agree solder is great. Been using >>> - ZUL8TR 07:12:51 11/23/14

Post a
Followup You cannot reply to this message because you are not logged in.