Subject	Think I'm missing something on my plenum pull
Posted by	Matt300ZXT on November 21, 2014 at 4:10 PM
	This message has been viewed 403 times.
Message	I'm trying to get this thing off so I can do my injectors and get rid of the old wiring and install the new. I have no EGR so that's not in the way. I've undone all bolts down the middle of the plenum, the 2 bolts on each side near the bottom by the PCV valves, undone the PCV hoses and of course all the coil packs, injector plugs, and various other things that were in the way. It's wiggly and juuust about off but it seems there's something near the back in the middle that's still holding it on. It can't be a bolt, maybe just 1 good stubborn hose that's connected to something but I can't really see anything that looks like it's holding it in place. Anyone have any ideas? I had to come back inside before I started getting pissed off lol
Follow Ups	Think I'm missing something on my plenum pull - Matt300ZXT 16:10:16 11/21/14 Coolant hose if you haven't done delete. (n/m) - ttz'in (NorCal) 17:55:37 11/21/14 Re: Coolant hose if you haven't done delete. - Matt300ZXT 19:41:03 11/21/14 Dremel the plenum at the appropriate locations to allow>> - ZUL8TR 11:15:23 11/22/14 Crimps are often the preferred splice method - BlackholeZ 13:01:59 11/22/14 I disagree, solder is far better and easy to learn - -Grimm- 13:43:48 11/22/14 Re: I disagree, solder is far better and easy to learn - Matt300ZXT 15:01:11 11/22/14 so are you going for the new style injectors and using >> - ZUL8TR 16:47:22 11/22/14 Re: so are you going for the new style injectors and using >> - Matt300ZXT 17:09:04 11/22/14 so far 2 to 1 on crimps, they do work well need correct >>. - ZUL8TR 16:46:01 11/22/14 Yeah, theyre even worse when bad tooling is used - -Grimm- 18:00:06 11/22/14 ^2nd^ (n/m) - ttz'in (NorCal) 03:52:36 11/23/14 Now 2 to 2! I agree solder is great. Been using >>> - ZUL8TR 07:12:51 11/23/14
Post a Followup	You cannot reply to this message because you are not logged in.