Subject	Update on code 34
Posted by	ukrdon2006 on October 21, 2014 at 11:04 AM
	This message has been viewed 282 times.
Message	So, when I was taking off on an onramp for the highway here, the car went into safety boost mode for an unknown reason to me. Went home and checked everything out and really didn't get an answer. Looked at the ECU and found code 34 along with code 13. I ordered a new sensor (not an oem) and a harness to relocate the sensor to the top of engine. Started it up and drove off, goes right back in to safety boost. Come back and check codes....code 34 again, bolt is tight, harness is connected. Any idea on how to trace the detonation circuit back to the ECU? Thats seems like it would be impossible. Also having an issue with the Z almost dying on me when I have my headlights on and i push on the brake coming to a stop light. Not sure if you guys have any experience with that. The alternator seems ok, as it checks at above 14v on the battery when running. Any ideas are greatly appreciated! Thanks!
Follow Ups	Update on code 34 - ukrdon2006 11:04:21 10/21/14 Re: Update on code 34 - ttz'in (NorCal) 11:32:39 10/21/14 Re: Re: Update on code 34 - ukrdon2006 12:02:12 10/21/14 It's not impossible to trace, nor is searching - ThisIsSparTTa 12:16:06 10/21/14 Re: It's not impossible to trace, nor is searching - ukrdon2006 12:27:22 10/21/14 Re: Re: It's not impossible to trace, nor is searching - ttz'in (NorCal) 12:48:09 10/21/14 We can't hand-hold through the process - ThisIsSparTTa 14:26:51 10/21/14 The ultimate guide to ECU diagnostics (TT.net) - SammybTT(TN) 12:29:17 10/21/14 Re: The ultimate guide to ECU diagnostics (TT.net) - ukrdon2006 12:38:56 10/21/14 How many times have you cleared the codes ? (n/m) - ttz'in (NorCal) 12:59:26 10/21/14 Re: How many times have you cleared the codes ? - ukrdon2006 13:05:48 10/21/14 This page has the info you are looking for: - ttsmokin 13:52:21 10/21/14 if you relocated amd cleared codes... - Khronik 23:04:01 10/22/14 This is the first post I have seen from you and didn't - SammybTT(TN) 19:46:15 10/21/14 Usually if replacing or relocating the det sensor - TriniTT 16:50:47 10/21/14 Detonation won't cause a code 34 - ttsmokin 21:31:15 10/21/14 2nd - aliaZ 12:24:46 10/23/14
Post a Followup	You cannot reply to this message because you are not logged in.