Subject	They were on idle and under load. I knew it wasnt my injecto
Posted by	Hydrus (Dallas) on October 18, 2014 at 5:26 PM
	This message has been viewed 176 times.
In Reply To	Re: Misfires at idle? posted by Sportzcoop on October 17, 2014 at 11:18 PM
Message	Rs. Sent them to deatchwerks last year for a cleaning. Turned out to be my tps harness and connectors. The tps and connectors were all withing soec but the harness is corroded and fragile so i taped it up and ziptied it so it wont move. All good now. Idle smooth as butter and pulls nicely especially in this cool fall weather. Thanks for all the extra idea fellas, gotta love this community.
Follow Ups	Bad misfire, hunting idle, no high idle on cold start up - Hydrus (Dallas) 13:08:18 10/15/14 Check water temp sensor, correct NGK plugs ? (n/m) - ttz'in (NorCal) 13:40:40 10/15/14 Replaced coolant temp for ECU and put fresh ngk iridium in. - Hydrus (Dallas) 13:42:11 10/15/14 Is misfire only one cylinder ? (n/m) - ttz'in (NorCal) 14:49:25 10/15/14 I would do a power balance test to determine if it is one - SammybTT(TN) 21:29:07 10/15/14 I replaced it with an autozone one. Picking an oem one up at - Hydrus (Dallas) 21:35:51 10/15/14 Re: I would do a power balance test to determine if it is one - Hydrus (Dallas) 21:37:19 10/15/14 Re: Bad misfire, hunting idle, no high idle on cold start up - Sportzcoop 22:48:31 10/15/14 Re: Re: Bad misfire, hunting idle, no high idle on cold start up - ttz'in (NorCal) 01:54:55 10/16/14 First item is power balance test (n/m) - SammybTT(TN) 12:46:40 10/16/14 Sorry shouldve made a list of everything ive done. - Hydrus (Dallas) 18:41:16 10/16/14 What were the results of the power balance test...? - -Grimm- 09:57:07 10/17/14 All cyclinders are firing and misfires continue. - Hydrus (Dallas) 12:41:26 10/17/14 Misfires at idle? - -Grimm- 17:23:04 10/17/14 Re: Misfires at idle? - Sportzcoop 23:18:50 10/17/14 They were on idle and under load. I knew it wasnt my injecto - Hydrus (Dallas) 17:26:57 10/18/14
Post a Followup	You cannot reply to this message because you are not logged in.