Subject	These might help. BTW, new efi harness ?
Posted by	ttz'in (NorCal) on October 17, 2014 at 10:57 PM
	This message has been viewed 138 times.
In Reply To	no, there is no voltage to the injectors-should be constant posted by johnny_z on October 17, 2014 at 10:50 PM
Message	[ http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=687543&forum=technical&dtSearch=21 ] [ http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=1105629&forum=technical&dtSearch=22 ]
Follow Ups	90 tt swap no start - johnny_z 20:51:43 10/17/14 When you turn the key to the run postion without cranking it - njz 21:29:44 10/17/14 yes, it has good fuel pressure (n/m) - johnny_z 21:58:25 10/17/14 just to clarify, everything is working except injectors. - johnny_z 22:33:21 10/17/14 Manually rotate CAS to verify injectors clicking ? (n/m) - ttz'in (NorCal) 22:42:22 10/17/14 no, there is no voltage to the injectors-should be constant - johnny_z 22:50:14 10/17/14 These might help. BTW, new efi harness ? - ttz'in (NorCal) 22:57:46 10/17/14 Re: no, there is no voltage to the injectors-should be constant - Sportzcoop 23:33:59 10/17/14 use the fsm wiring dia. to check continuity on the wires - LivinTheDream 07:49:32 10/18/14
Post a Followup	You cannot reply to this message because you are not logged in.