Subject	All cyclinders are firing and misfires continue.
Posted by	Hydrus (Dallas) on October 17, 2014 at 12:41 PM
	This message has been viewed 161 times.
In Reply To	What were the results of the power balance test...? posted by -Grimm- on October 17, 2014 at 09:57 AM
Message	I did just install the ecu after inspecting for butned circuits and my cold start idle is back so now the only issue is missing terribly when i press the accelerator. No codes anymore as well. Have a buddy coming over so i can swap in his ptu, hopefully ill see a change with his. Ill update after the test
Follow Ups	Bad misfire, hunting idle, no high idle on cold start up - Hydrus (Dallas) 13:08:18 10/15/14 Check water temp sensor, correct NGK plugs ? (n/m) - ttz'in (NorCal) 13:40:40 10/15/14 Replaced coolant temp for ECU and put fresh ngk iridium in. - Hydrus (Dallas) 13:42:11 10/15/14 Is misfire only one cylinder ? (n/m) - ttz'in (NorCal) 14:49:25 10/15/14 I would do a power balance test to determine if it is one - SammybTT(TN) 21:29:07 10/15/14 I replaced it with an autozone one. Picking an oem one up at - Hydrus (Dallas) 21:35:51 10/15/14 Re: I would do a power balance test to determine if it is one - Hydrus (Dallas) 21:37:19 10/15/14 Re: Bad misfire, hunting idle, no high idle on cold start up - Sportzcoop 22:48:31 10/15/14 Re: Re: Bad misfire, hunting idle, no high idle on cold start up - ttz'in (NorCal) 01:54:55 10/16/14 First item is power balance test (n/m) - SammybTT(TN) 12:46:40 10/16/14 Sorry shouldve made a list of everything ive done. - Hydrus (Dallas) 18:41:16 10/16/14 What were the results of the power balance test...? - -Grimm- 09:57:07 10/17/14 All cyclinders are firing and misfires continue. - Hydrus (Dallas) 12:41:26 10/17/14 Misfires at idle? - -Grimm- 17:23:04 10/17/14 Re: Misfires at idle? - Sportzcoop 23:18:50 10/17/14 They were on idle and under load. I knew it wasnt my injecto - Hydrus (Dallas) 17:26:57 10/18/14
Post a Followup	You cannot reply to this message because you are not logged in.