TwinTurbo.NET: Nissan 300ZX forum - Check water temp sensor, correct NGK plugs ? (n/m)
Subject
Check water temp sensor, correct NGK plugs ? (n/m)
Posted by
ttz'in (NorCal)
on October 15, 2014 at 1:40 PM
This message has been viewed
145
times.
In Reply To
Bad misfire, hunting idle, no high idle on cold start up
posted by Hydrus (Dallas)
on October 15, 2014 at 01:08 PM
Message
Follow Ups
Bad misfire, hunting idle, no high idle on cold start up
-
Hydrus (Dallas)
13:08:18 10/15/14
Check water temp sensor, correct NGK plugs ? (n/m) -
ttz'in (NorCal)
13:40:40 10/15/14
Replaced coolant temp for ECU and put fresh ngk iridium in.
-
Hydrus (Dallas)
13:42:11 10/15/14
Is misfire only one cylinder ? (n/m)
-
ttz'in (NorCal)
14:49:25 10/15/14
I would do a power balance test to determine if it is one
-
SammybTT(TN)
21:29:07 10/15/14
I replaced it with an autozone one. Picking an oem one up at
-
Hydrus (Dallas)
21:35:51 10/15/14
Re: I would do a power balance test to determine if it is one
-
Hydrus (Dallas)
21:37:19 10/15/14
Re: Bad misfire, hunting idle, no high idle on cold start up
-
Sportzcoop
22:48:31 10/15/14
Re: Re: Bad misfire, hunting idle, no high idle on cold start up
-
ttz'in (NorCal)
01:54:55 10/16/14
First item is power balance test (n/m)
-
SammybTT(TN)
12:46:40 10/16/14
Sorry shouldve made a list of everything ive done.
-
Hydrus (Dallas)
18:41:16 10/16/14
What were the results of the power balance test...?
-
-Grimm-
09:57:07 10/17/14
All cyclinders are firing and misfires continue.
-
Hydrus (Dallas)
12:41:26 10/17/14
Misfires at idle?
-
-Grimm-
17:23:04 10/17/14
Re: Misfires at idle?
-
Sportzcoop
23:18:50 10/17/14
They were on idle and under load. I knew it wasnt my injecto
-
Hydrus (Dallas)
17:26:57 10/18/14
Post a
Followup
You cannot reply to this message because you are not
logged in
.