Subject	Re: Re: Master Z mechanics please help.
Posted by	sdvdoc on October 14, 2014 at 7:04 PM
	This message has been viewed 214 times.
In Reply To	Re: Master Z mechanics please help. posted by backinblack626 on October 14, 2014 at 10:30 AM
Message	It stumbles through until about 2500 rpm. Dies once the throttle is released. I'm thinking its not the iacv. Even at 2500, it will periodically backfire. The injectors all ohm'ed out around 12 - within specs. I haven't checked the MAF. I'll do that next. Thanks.
Follow Ups	Master Z mechanics please help. - sdvdoc 21:46:25 10/13/14 Your timing is at 15 degrees at 2500 rpm? (n/m) - BarryGZX 21:56:09 10/13/14 Re: Your timing is at 15 degrees at 2500 rpm? - sdvdoc 06:00:04 10/14/14 15 btdc at 2500 rpm is way retarded - BarryGZX 20:01:22 10/14/14 Re: 15 btdc at 2500 rpm is way retarded - sdvdoc 20:29:32 10/14/14 sounds like a vacuum leak. As for timing it is set at >> - ZUL8TR 03:05:03 10/14/14 Re: sounds like a vacuum leak. As for timing it is set at >> - sdvdoc 05:56:20 10/14/14 This might help with the vacuum testing >>>>>>>>>>>>> - ZUL8TR 04:47:05 10/15/14 Re: Master Z mechanics please help. - backinblack626 10:30:30 10/14/14 Re: Re: Master Z mechanics please help. - sdvdoc 19:04:48 10/14/14
Post a Followup	You cannot reply to this message because you are not logged in.