Subject	Re: Your timing is at 15 degrees at 2500 rpm?
Posted by	sdvdoc on October 14, 2014 at 6:00 AM
	This message has been viewed 235 times.
In Reply To	Your timing is at 15 degrees at 2500 rpm? (n/m) posted by BarryGZX on October 13, 2014 at 09:56 PM
Message	Yes, but now that you bring it up, that would be wrong. I could not idle therefore I set timing at the rpm I could achieve so my timing is still off.
Follow Ups	Master Z mechanics please help. - sdvdoc 21:46:25 10/13/14 Your timing is at 15 degrees at 2500 rpm? (n/m) - BarryGZX 21:56:09 10/13/14 Re: Your timing is at 15 degrees at 2500 rpm? - sdvdoc 06:00:04 10/14/14 15 btdc at 2500 rpm is way retarded - BarryGZX 20:01:22 10/14/14 Re: 15 btdc at 2500 rpm is way retarded - sdvdoc 20:29:32 10/14/14 sounds like a vacuum leak. As for timing it is set at >> - ZUL8TR 03:05:03 10/14/14 Re: sounds like a vacuum leak. As for timing it is set at >> - sdvdoc 05:56:20 10/14/14 This might help with the vacuum testing >>>>>>>>>>>>> - ZUL8TR 04:47:05 10/15/14 Re: Master Z mechanics please help. - backinblack626 10:30:30 10/14/14 Re: Re: Master Z mechanics please help. - sdvdoc 19:04:48 10/14/14
Post a Followup	You cannot reply to this message because you are not logged in.