Subject	I would also change all your fluids
Posted by	-Grimm- on August 19, 2014 at 10:43 AM
	This message has been viewed 170 times.
In Reply To	Z has been sitting a long time...what precautions to take? posted by ChristopherTheOne on August 19, 2014 at 12:50 AM
Message	There are two bolts on the bottom of the gas tank for draining, its easier than siphoning. Also, I found a post about priming the oil pump that I followed after my rebuild. I bought a fram filter, used a spade bit to drill a hole in it and put a PVC fitting on it. Hooked up my vacuum, disconnected coil/injector power, and crank it over with my vacuum on for a few seconds at a time until I saw oil in the (clear) hose between the filter and vacuum. Spinning by hand wont be enough to prime the oil pump. ------------------------------------------------------------------ 1992 300ZX NA 5 Sp (Dead) 1990 300ZX NA Auto 2+2 (Dead) 1990 300ZX TT 5 Sp (Building) 2004 G35 Sport 6MT (DD)
Follow Ups	Z has been sitting a long time...what precautions to take? - ChristopherTheOne 00:50:15 08/19/14 Sounds like you are on the right track - SammybTT(TN) 09:39:57 08/19/14 I would also change all your fluids - -Grimm- 10:43:45 08/19/14 Good to know! - ChristopherTheOne 10:58:00 08/20/14 Get her going and enjoy it now, modify when it's cold (n/m) - SammybTT(TN) 21:32:29 08/20/14
Post a Followup	You cannot reply to this message because you are not logged in.