| Message |
Hey guys, Ive got an Aeromotive 13101 fuel pressure regulator and aeromotive fuel filter. The fittings in the side are huge #10 o ring boss fittings. Aeromotive says they dont make one that goes to a 5/16" barbed fitting to adapt to the z32s stock fuel hose. I cant seem to figure out where to get the proper fittings or what to use. The IN port on the bottom has a smaller fitting that I can adapt to the 5/16" but the two side ports are huge and I cant find an adapter. Thought about removing the rails (stock rails) and cutting the ends off and welding on whatever I feel maybe 3/8". Thinking at this point I might as well get a different rail but want to be efficient. Dont want to buy a new rail for my old style injectors and then want to get new style later down the road I would need to change the rail again... Please, any ideas on this subject. Im running no fuel filter right now and scared to drive the car anywhere.
|
 |
