Subject	you have it backwards
Posted by	Carlos Ramirez on July 28, 2014 at 9:03 AM
	This message has been viewed 163 times.
In Reply To	Re: The brown connector next to relay box posted by ZTom on July 27, 2014 at 02:50 PM
Message	The ECU sends gnd signal at all times.. Also I was trying to help you figure out what your issue was I think your issue is that you have break on the body harness check pin 5 on the relay and then check to see if you have power on pins 1 and 3. Good luck :-)
Follow Ups	A C problems - ZTom 17:02:38 07/25/14 ZTOM I am testing my AC issues as well.. - Carlos Ramirez 20:55:59 07/26/14 Re: ECU is the problem - ZTom 14:40:15 07/27/14 Re: The brown connector next to relay box - ZTom 14:50:47 07/27/14 you have it backwards - Carlos Ramirez 09:03:56 07/28/14 Re: thanks - ZTom 21:51:37 07/28/14 are you sure this doesn't make sense to me.. - Carlos Ramirez 08:34:59 07/29/14 Re: OK let me clearify - ZTom 09:22:43 07/29/14
Post a Followup	You cannot reply to this message because you are not logged in.