Subject	the FSM speaks of a Thermo Control amplifier
Posted by	Carlos Ramirez on July 24, 2014 at 4:24 PM
	This message has been viewed 191 times.
In Reply To	you won't see a signal at the relay if you are low on freon posted by aliaZ on July 24, 2014 at 03:56 PM
Message	And that and the ECCM is what controls the signal to the AC clutch I have activated the AC clutch.. I believe this is the issue I haven't heard of this issue before but after replacing the AC compressor, testing it, and adding freon to it (16 oz) the clutch wont engage thus pointing to an electrical issue.
Follow Ups	A/C not working need some assistance. - Carlos Ramirez 13:10:48 07/24/14 you won't see a signal at the relay if you are low on freon - aliaZ 15:56:32 07/24/14 the FSM speaks of a Thermo Control amplifier - Carlos Ramirez 16:24:09 07/24/14 The Thermo Switch is for certain years - ZXRider 16:47:19 07/24/14 I realized aliasZ was right.. - Carlos Ramirez 17:15:05 07/24/14 I realized aliasZ was right.. - Carlos Ramirez 17:35:17 07/24/14 other things to check - aliaZ 23:44:26 07/24/14 I can try that - Carlos Ramirez 09:08:14 07/25/14 yes, 46 should be grounded already - aliaZ 10:28:43 07/25/14 ... pins 46 and 9 both showing ground - Carlos Ramirez 19:19:04 07/25/14 Check your Ambient Temp Sensor... - Russell.DiVittorio 18:33:51 07/24/14 Can you check function of that sensor using the built-in - ZXoltan 20:11:43 07/24/14 if it is bad or missing, it will throw a trouble code (n/m) - aliaZ 23:46:05 07/24/14 in my 97 maxima the clutch wouldn't engage because - inf 01:13:49 07/25/14
Post a Followup	You cannot reply to this message because you are not logged in.