Subject	Re: Also...
Posted by	KeepinitClassy on July 25, 2014 at 5:39 AM
	This message has been viewed 108 times.
In Reply To	Also... posted by -Grimm- on July 24, 2014 at 07:22 PM
Message	Profile updated! Zack I get the point that once you start taking things off you might as well replace whats under there especially if it is brittle or broken in the process of removal. Sounds like it should be a fun time. Grimm, I thought of an oil line for the turbo, we checked those while we had it up on the lift and they seemed to be tight as we put a wrench to it and they were already tight.
Follow Ups	Oil leak/smoke by the brake reservoir - KeepinitClassy 17:27:11 07/24/14 It's probably the valve cover RTV leaking. The exhaust - jzack 18:20:11 07/24/14 Sorry - the rear of the exhaust valve area has a half-moon - jzack 18:22:08 07/24/14 Re: Sorry - the rear of the exhaust valve area has a half-moon - KeepinitClassy 19:23:01 07/24/14 The issue in pulling the plenum if never done before - - jzack 20:49:45 07/24/14 Yes - if you somewhat experienced in Saturday - jzack 20:57:26 07/24/14 Could be those^ - -Grimm- 19:21:23 07/24/14 Also... - -Grimm- 19:22:44 07/24/14 Re: Also... - KeepinitClassy 05:39:15 07/25/14 Did you make sure to check the flare by the motor mount - -Grimm- 09:34:56 07/25/14
Post a Followup	You cannot reply to this message because you are not logged in.