Subject	Hard to say
Posted by	ttsmokin on July 21, 2014 at 2:14 PM
	This message has been viewed 110 times.
In Reply To	They were not centered. They were twisted at an angle. posted by ZaXxon on July 21, 2014 at 08:36 AM
Message	They can bind up and wear unevenly if they are twisted, this is a crucial step in the alignment process with rod end arms. I would pull them off, put them in a vice and swivel the rod end around to look for grooves and excessive play/slop. There should be zero play detectable by hand.
Follow Ups	SPL tension rod, heims are very noisy....embarrassing.... - ZaXxon 09:01:18 07/20/14 I had the full solid suspension up front - BarryGZX 12:01:59 07/20/14 Why don't you contact SPL? - ttsmokin 13:19:38 07/20/14 The centered heims is crucial!! (n/m) - BarryGZX 14:54:54 07/20/14 They were not centered. They were twisted at an angle. - ZaXxon 08:36:06 07/21/14 Hard to say - ttsmokin 14:14:14 07/21/14 I have them on front and rear with no such issues. - Boosted1 14:53:04 07/20/14 They shouldn't make any noises without obvious signs of wear - TriniTT 11:12:07 07/22/14 Bolts and all bushings up front are good. - ZaXxon 12:39:03 07/22/14 Also, make sure to keep the heims lubricated. (n/m) - TriniTT 14:30:41 07/24/14
Post a Followup	You cannot reply to this message because you are not logged in.