Subject	SPL tension rod, heims are very noisy....embarrassing....
Posted by	ZaXxon on July 20, 2014 at 9:01 AM
	This message has been viewed 358 times.
Message	At slower speeds, every little bump they make popping noises. Yes, I used a pry bar to check all other front suspension bushings. I even removed the struts and pryed the suspension up and down to replicate the popping noise, and definitely narrowed it down to the heims. Can anything be done about this? If not, I may go back to stock tension rods. I curse that I scrapped them now. The heims on the rear SPL components make no noise at all.
Follow Ups	SPL tension rod, heims are very noisy....embarrassing.... - ZaXxon 09:01:18 07/20/14 I had the full solid suspension up front - BarryGZX 12:01:59 07/20/14 Why don't you contact SPL? - ttsmokin 13:19:38 07/20/14 The centered heims is crucial!! (n/m) - BarryGZX 14:54:54 07/20/14 They were not centered. They were twisted at an angle. - ZaXxon 08:36:06 07/21/14 Hard to say - ttsmokin 14:14:14 07/21/14 I have them on front and rear with no such issues. - Boosted1 14:53:04 07/20/14 They shouldn't make any noises without obvious signs of wear - TriniTT 11:12:07 07/22/14 Bolts and all bushings up front are good. - ZaXxon 12:39:03 07/22/14 Also, make sure to keep the heims lubricated. (n/m) - TriniTT 14:30:41 07/24/14
Post a Followup	You cannot reply to this message because you are not logged in.