Subject	Vacuum Hosing
Posted by	Khronik on April 11, 2014 at 11:03 PM
	This message has been viewed 399 times.
Message	Engine is on the stand. Dont have an EBC but plan on getting one in the near future. Question: Do I have to use the factory boost solenoids or can I bypass them and run the vacuum as if it had an EBC using a connector that can be swapped out with a "T" connector when I get the EBC? Had the ECU upgraded and have the boost jets for 12-14psi from CZP do i have to run this?(edited this to have no AIV/PRVR/EGR/Carbon Canister): Can I run it this way? ================================= 1991 NA 2+2 - Pearl White - Auto 1996 NA - Arctic White - 5Speed 1990 TT - Aztec Red - 5Speed
Follow Ups	Vacuum Hosing - Khronik 23:03:34 04/11/14 looks correct - ThisIsSparTTa 09:45:46 04/12/14 Re: Vacuum Hosing - Metal_Slinger 20:13:45 04/12/14 the diagrams i found are here - Khronik 03:18:38 04/13/14 Re: Re: Vacuum Hosing - ThisIsSparTTa 09:38:37 04/13/14 You will be fine - -Grimm- 09:58:13 04/15/14
Post a Followup	You cannot reply to this message because you are not logged in.