Subject	Try another ECU.....
Posted by	zx299 on December 03, 2013 at 12:06 AM
	This message has been viewed 213 times.
In Reply To	cold start problems posted by slcZ32 on December 02, 2013 at 08:29 PM
Message	The ecu should prime the fuel rail when the ignition is turned on. You are only priming when the engine is cranking (cas signal) so it appears you may have a software corruption in the ecu. Fit a 'known' working ecu and that should fix your problem "If you own a 300zx, you don't have time for a hobby" "If you own more than one 300zx, you don't have time for a life"
Follow Ups	cold start problems - slcZ32 20:29:39 12/02/13 Try another ECU..... - zx299 00:06:03 12/03/13 Do some voltage checks please.. - Cjw3 09:48:50 12/03/13 Fuel pump is working..... - zx299 16:15:22 12/03/13 Gives me something to look at - -Grimm- 17:06:46 12/03/13 Re: Gives me something to look at - slcZ32 19:14:07 12/03/13 No your situation is not normal - Cjw3 19:19:02 12/03/13 Excactly, not saying its normal - -Grimm- 09:02:56 12/04/13 Yours is easy to check...... - zx299 18:02:49 12/04/13 Re: Fuel pump is working..... - slcZ32 19:08:14 12/03/13 Yes it works.. - Cjw3 19:15:30 12/03/13 Re: Yes it works.. - slcZ32 22:05:17 12/03/13 Fuel Control Unit - Cjw3 08:26:01 12/04/13 Re: Fuel Control Unit - slcZ32 06:05:18 12/07/13
Post a Followup	You cannot reply to this message because you are not logged in.