Subject	Definitely
Posted by	ThisIsSparTTa on July 17, 2013 at 4:37 PM
	This message has been viewed 205 times.
In Reply To	VTC Solenoid? posted by mlaurie69 on July 17, 2013 at 01:44 PM
Message	Remove plenum, fuel rail, intake valve cover, remove VTC, clean it up, RTV it, put it all back together. I'd buy new intake valve cover gaskets and do both sides while you're in there. Intake covers are easy. I wouldn't recommend doing exhaust valve covers unless they are leaking as they are a total PITA to clean up the RTV on the heads and get the screws back in while in the car. [ http://z32.wikispaces.com/Valve+Cover ]
Follow Ups	VTC Solenoid? - mlaurie69 13:44:35 07/17/13 Definitely - ThisIsSparTTa 16:37:26 07/17/13 Re: Definitely - mlaurie69 18:15:25 07/17/13 You'll want to pull the VCs to do this job right.... (n/m) - jzack 18:50:47 07/17/13 You'll need to pull the plenum and valve cover (n/m) - ThisIsSparTTa 10:01:14 07/18/13 I've pulled just the solenoid - xpwarrior 18:01:21 07/18/13 I pulled the drivers side VTC w/o a plenum pull this weekend - ThisIsSparTTa 10:50:20 07/22/13
Post a Followup	You cannot reply to this message because you are not logged in.