Subject	Engine won't turn over *bangs head against wall*
Posted by	Jinjiro on May 26, 2012 at 12:47 PM
	This message has been viewed 445 times.
Message	Gotta love these cars. =) The Z started fine two weeks ago when I noticed a gas leak coming from somewhere. I pulled the plenum, replaced the injector o-rings and fuel clamps, and put it all back together. Now I can't get the engine to turn over. When I turn the key, the starter engages with a thud but the flywheel won't spin. I've tried two different batteries that I know are good. I disconnected the starter, applied power, and confirmed it is working. I also checked to make sure the clutch slave cylinder is working, but I'm wondering if the clutch line needs to be bled or adjusted? I did put in a HD clutch fork last month, so I'm wondering if that is throwing the adjustment off. The weird thing is it started ok several times after I put the new fork in. I don't get why the clutch would be adjusted & working, and then stop working without me messing with it.
Follow Ups	Engine won't turn over *bangs head against wall* - Jinjiro 12:47:38 05/26/12 Propably not the clutch - Rocket man 13:02:19 05/26/12 Turn the crank with a wrench to make sure it will turn - JBender 13:45:58 05/26/12 This is the right answer. Since you just worked on - zellamay 10:05:26 05/27/12 Thanks for pointing me in the right direction, I'll check it - Jinjiro 20:27:16 05/27/12 Fixed, for those who have similar problem(s) in the future - Jinjiro 20:51:54 05/30/12
Post a Followup	You cannot reply to this message because you are not logged in.