Subject	I've had trouble with 2 of those CAS brackets myself...
Posted by	jzack on May 15, 2010 at 9:46 PM
	This message has been viewed 89 times.
In Reply To	hope this helps posted by de944 on May 15, 2010 at 12:10 AM
Message	Just keep whacking with a rubber mallet and tugging - they eventually come loose. On the re-install, lube the locator pins up with some anti seize compound....
Follow Ups	60K service - stuck CAS bracket & use of impact wrench? - evan_aggie 23:09:56 05/14/10 hope this helps - de944 00:10:29 05/15/10 If you break it... - Draker (Eugene, OR) 00:55:12 05/15/10 Looks like you read my mind! - evan_aggie 09:05:48 05/15/10 I'm prep'ing an engine and doing most of the work alone.... - jzack 22:28:26 05/15/10 I've had trouble with 2 of those CAS brackets myself... - jzack 21:46:31 05/15/10
Post a Followup	You cannot reply to this message because you are not logged in.