| Here are some pics. These first two pictures illustrate the height difference between the two pipes. Both pipes are lying flat on the floor. Also note the differences in the two flanges. 
This next picture shows the gap between the exhaust manifold and the flange on the Random Technology pipe. 
Note that when the above picture was taken the pipe was right up against the car's floor board. It it were lowered to a normal position the gap would be even greater. The picture below shows the position of the pipe relative to the floor board when the above picture was taken. 
Finally, here is the link to Random Technologies web site which states that p/n 172-25001 and 172-25002 are "direct fit, bolt-in" pipes for an NA.
|
Re: Replacement Cats/Front Pipes - 
