Subject	For forged pistons, you should follow the recommended
Posted by	timz on April 22, 2010 at 11:56 AM
	This message has been viewed 199 times.
In Reply To	ring end gaps??? posted by paintballkustoms on April 21, 2010 at 09:02 AM
Message	gap by the piston manufacturer. I use this for all my engine builds. Example, if I use wiseco pistons, top ring gap should be 0.055 x cylinder bore size. 2nd ring will be 0.06 x cylinder bore size. Let say you have 88mm wiseco (turbo piston of course), Bore size should be ~ 88.064mm top ring gap will be 0.0055 x88.064 = 0.484 mm (~19 thou) second ring gap is 0.006x88.064 = 0.528 mm (~21 thou) Different piston like Tomei have different gap so just follow their gap size.
Follow Ups	ring end gaps??? - paintballkustoms 09:02:47 04/21/10 For forged pistons, you should follow the recommended - timz 11:56:36 04/22/10 Re: For forged pistons, you should follow the recommended - paintballkustoms 14:18:52 04/22/10 Re: For forged pistons, you should follow the recommended - paintballkustoms 16:42:53 04/22/10 Re: For forged pistons, you should follow the recommended - Tech@EPR 20:21:12 04/23/10
Post a Followup	You cannot reply to this message because you are not logged in.