Subject	update
Posted by	dubya86 on April 16, 2010 at 1:46 PM
	This message has been viewed 97 times.
In Reply To	Put on new PTU this morning... posted by dubya86 on April 16, 2010 at 10:41 AM
Message	Picked up an ignition spark tester and a compression tester... The ignition spark appears to be the same on all six cylinders. Did not perform compression test on cylinder 6 (getting tired of pulling the balance tube off) but the compression on cylinder 2 was 150 Psi (forgot to open the throttle up all the way) and the service manual says it should be 143 Psi minimum. did not check others yet as is just too much other stuff going on. *82 Degrees, sun is shining, T-tops are off, windows are down, cruising down the highway at 80 MPH, and the only music I can here is coming from my exhaust... this is what owning a Z32 is all about.*
Follow Ups	At my wits end - dubya86 17:06:03 04/15/10 Have you swapped PTU's to a known good PTU? - Draker (Eugene, OR) 23:41:53 04/15/10 Put on new PTU this morning... - dubya86 10:41:22 04/16/10 update - dubya86 13:46:06 04/16/10 150psi would fire. - Draker (Eugene, OR) 14:20:47 04/16/10 Injectors are only 1 month old. - dubya86 18:43:26 04/16/10 Also, swap plugs to another known good cylinder. - Draker (Eugene, OR) 14:22:26 04/16/10
Post a Followup	You cannot reply to this message because you are not logged in.