Subject	Re: Help Please: Starter Installation
Posted by	draker on March 15, 2010 at 1:02 PM
	This message has been viewed 75 times.
In Reply To	Help Please: Starter Installation posted by cHiNgLeZ on March 14, 2010 at 10:55 PM
Message	There have been some good suggestions on here. And if its a TT auto, I know the stud is on the bottom. I removed dropped 2 TT trannys in the past 2 weeks, and it's indeed on the bottom. If this was reversed, maybe this was part of the reason it snapped. (Who knows..) Either way, get some PB and a reverse drill bit, and heat that sucker up! The stud will probably come out really easy. As far as bolt extractors, I've never had success with them. Not to say they don't work, but a drill bit has been more beneficial to me.
Follow Ups	Help Please: Starter Installation - cHiNgLeZ 22:55:05 03/14/10 Re: Help Please: Starter Installation - draker 23:55:40 03/14/10 Arghhh how wonderful... - cHiNgLeZ 00:35:19 03/15/10 Re: Arghhh how wonderful... - draker 01:00:44 03/15/10 Oh hold on a sec...I thought this stud was on the top. - cHiNgLeZ 01:17:19 03/15/10 Hmm so I read through a few posts while searching and found - cHiNgLeZ 02:38:26 03/15/10 Turn the motor over by hand a few times after replacing... - musky 08:59:01 03/15/10 just use a "bolt extractor"- should be pretty easy - musky 01:08:47 03/15/10 Also consider some heat on the aluminum (20 secs or so)>> - ZUL8TR 06:49:42 03/15/10 the easiest way to get that out of a tight spot like that - KasbeKZ(VA) 09:59:30 03/15/10 Re: Help Please: Starter Installation - draker 13:02:50 03/15/10 Thank you everyone for the help. - cHiNgLeZ 15:24:56 03/15/10 Drill and tap make sure you have a good drill - John (MD) 08:15:01 03/16/10
Post a Followup	You cannot reply to this message because you are not logged in.