Subject	Re: injector inconsistant with ohms testing.
Posted by	MrOzzie5183 on March 11, 2010 at 2:46 PM
	This message has been viewed 136 times.
In Reply To	injector inconsistant with ohms testing. posted by fanta-z on March 11, 2010 at 02:07 PM
Message	when you tested the injectors through the ecu harnass you were testing the wires up to the injecor along with the injector, more than likely you just have a bad injector connecter, these are approx. 10 bucks a pop, you might be able to get away with cleaning it, look inside and if it's green it's all corroded and that's where your extra resistance is coming from
Follow Ups	injector inconsistant with ohms testing. - fanta-z 14:07:38 03/11/10 Re: injector inconsistant with ohms testing. - MrOzzie5183 14:46:23 03/11/10 The injector connectors are actually all new, I soldered on - fanta-z 15:22:33 03/11/10 Realize that as the injectors start to fail then sometimes - jzack 17:50:00 03/11/10 curious part is it was working when tested 45ohms, but your - fanta-z 01:52:06 03/12/10 The green connector corrosion is what I had as well >> - ZUL8TR 06:27:09 03/12/10 meter still good? it'll be inconsistent mostly with ohms - SilverSlickTopTT 18:19:20 03/12/10 hmmm well it was from freight harbor, was like $2.99 lol - fanta-z 19:17:38 03/12/10 Harbor Freight! 2.99!? no bueno...no bueno - SilverSlickTopTT 16:57:26 03/13/10
Post a Followup	You cannot reply to this message because you are not logged in.