Subject	I think it's better to actually run them and look for a
Posted by	jzack on March 10, 2010 at 6:55 PM
	This message has been viewed 78 times.
In Reply To	I have found posts on how to check for bad injectors> posted by BrianTT(Tpa,Fl) on March 10, 2010 at 07:45 AM
Message	spark (no guessing that way). Pull pack, slip in spare spark plug and ground threaded body, connect pack to car'sharness, crank or start engine and look for a spark....
Follow Ups	I have found posts on how to check for bad injectors> - BrianTT(Tpa,Fl) 07:45:29 03/10/10 swap a coil pack from a working cylinder - Ahmed (Chicago) 08:02:17 03/10/10 coils should ohm around .7 (n/m) - Paulym1111 08:08:26 03/10/10 Where do I check? At the coil or ECU? (n/m) - BrianTT(Tpa,Fl) 08:11:13 03/10/10 check the ohm's from the pins on the coil pack itself.. - Paulym1111 09:40:01 03/10/10 Thanks for the info! (n/m) - BrianTT(Tpa,Fl) 09:58:55 03/10/10 I think it's better to actually run them and look for a - jzack 18:55:44 03/10/10
Post a Followup	You cannot reply to this message because you are not logged in.